23.8 C
Saturday, May 28, 2022

How to Prepare Your Interior Walls for Painting

Must read

House painting is a great DIY project. It’s a simple renovation idea that, when done properly, can transform your property for the better. It’s great for those who are looking to sell their property, move out of their home or reinvent their living space.

Before you get rolling though, you need to know how to prepare your walls. If you skip the proper preparation, you can end up with a rough looking finish that could start cracking and peeling over time.

To help you avoid that problem we’ve created a brief guide on how to prepare your interior walls for painting. Remember, if you’re unsure about anything in the process or if you feel that this is too much for you to handle, you can always hire professional house painting services.

1.Prepare the surrounding area

Before you do anything to the wall, you need to make sure that the surrounding room is as protected as possible. Remove hanging items like picture frames, diplomas, posters, artwork and clocks and so on. Also, don’t forget to remove the plastic plate on your light switches and power outlets.

To be extra safe, it’s also a good idea to remove any furniture that’s within the vicinity of the wall you’re painting. If you have a sofa or a chair that is too heavy to lift, you can simply cover it using a plastic sheet.

Of course, you’ll also need to cover your flooring. Plastic or paper sheets can work well. However, if you have a hard floor, those sheets will end up slipping underneath your feet. As a result, it’s best to use a sheet of canvas.


Next, you’re going to need to clean the walls. If you have wallpaper, remove it with a home-made or off-the-shelf wallpaper removing solution. The former will generally cost you less. However, since it involves vinegar, it can soak into the drywall and leave an odour. If you want to avoid this problem, make sure you use a quality wallpaper remover. Alternatively, you can hire house painting professionals to do this for you.

If you’re just dealing with an old coat of paint, make sure to use a putty knife to remove flaking layers and any other bumps on the surface. You don’t need to remove the whole paint layer, you just need to make sure you have a flat wall to paint on.

After that, you need to give your walls a wet clean. To do this, you should use a sponge with a mixture of sugar soap and water. This will do two things. First, it helps the new layer of paint stick to the wall. Secondly, it gets rid of any stains or marks that might show through the final finish. When you’ve thoroughly cleaned the wall, make sure you dry it off before moving on.

3.Masking tape

No matter how good of a painter you are, there are going to be parts of your wall that will be tricky to deal with. This includes the areas near your skirting, door frames and window sills.

To make life easier, use a Painters masking tape to cover up any surface that you don’t want to paint over. When doing this, make sure you use long pieces of tape. Using a series of short pieces can cause the paint to seep through. Additionally, make sure that the tape is firmly attached to the surface and covers the very edge of the area that you’re protecting. You can run a putty knife along the tape to make sure that it is properly attached.

4.Fill any gaps and cracks

Painters Frankston

If you’ve had your property for a while, chances are you’ll have a few dents and holes on your drywall. Regardless of how small they are, It’s important to fix these blemishes. Leaving them as they are can ruin your new paint finish.

For small holes and dents, simply clean out the surrounding area, remove any flaking and apply filler to the hole. Use a putty knife to remove any excess on the surface. When it’s dry, sand down the area to smooth out any imperfections.

5.Apply primer

This is an important step in any painting job. The primer helps the paint stick to the surface, helps bring out the true colour of the paint and improves the longevity of the finish.

Generally speaking, primer is needed when you’re painting over a bare drywall and/or newly repaired areas. It’s also necessary if you’re after a high-gloss finish.

Keep in mind that there are different types of primer for different purposes. If you’re painting your walls a darker colour, make sure you use a tinted primer. If you’re using a lighter paint, then a regular white primer will do just fine.

There are also products that combine the paint and primer in one can. This can save you both time and money.

There are plenty of people that just go into this project without too much preparation. Unfortunately, these people often find that the end result isn’t what they were looking for. But, with just a little bit of research and a little bit of prepwork, you can avoid this problem. If you follow these steps, the painting process will be a whole lot easier.

- Advertisement -SEO Services

More articles

Latest article